LED flood light outdoorFeatures:
1.High brightness high power lumileds 3030smd Led Chip as light source,low voltage constant current drive.
2.Made by 1070 aluminum, with great heat-emission and decorative appearance, errosion and dustproof.
3.Take the diffuser to adjust the beam angle , reducing the light loss at the time of secondary light
distribution, thus the light efficiency is improved and energy-saving purpose is reached.
4.Adoptment of the “1w per piece”chip as light source to meet the high requirements of heat-dissapation.
Distributive heat emission, air tensile aluminum with high thermal-conductivity and sufficient area
of heat release make it ensured that the LED flood tunnel light works with good efficiency, reliablity and lifespan.
5.Place the power driver to the surface of lamp, decreasing the mutual impact between lamp and driver
heat emission. Easier for power-maintenance because of better power heat dissipation.
6.Widely used for lighting of road and tunnel and garden and so on .
| Model | Power | Luminous flux(lm) | PF | CCT (kelvin) | CRI (Ra) | Volt (AC) | Beam Angle |
| TH-FS230-50W | 50W | 6000lm±5% | >0.92 | 2700-6500 | ≥70 | 90-265V | 120° |
| TH-FS230-70W | 70W | 8500lm±5% | >0.92 | 2700-6500 | ≥70 | 90-265V | 120° |
| TH-FS270-100W | 100W | 12000lm±5% | >0.92 | 2700-6500 | ≥70 | 90-265V | 120° |
| TH-FS270-150W | 150W | 18000lm±5% | >0.92 | 2700-6500 | ≥70 | 90-265V | 120° |
| TH-FS380-200W | 200W | 24000lm±5% | >0.92 | 2700-6500 | ≥70 | 90-265V | 120° |
